Replacement Hasp for Polar Cam-Action Latch Kit - 2" Wide - Zinc-Plated Steel
(189 reviews)
Price: $21.72
In Stock
Replacement Hasp for Polar Cam-Action Latch Kit - 2" Wide - Zinc-Plated Steel
Item # PLR258-101
Retail:$24.15
Our Price: $21.72
You Save: 10%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (189)
- Q & A (0)
- Videos (2)
- Photos
Polar Hardware Trailer Door Latch - PLR258-101
- 2-Hole Hasp
- Hasps
- Steel
- 5-1/8 Inch Long
- Lock Not Included
- Polar Hardware
- 2 Inch Wide
Replacement hasp fits Polar Hardware cam-action lockable door latch kit (PLR258-002) for large enclosed trailers. Zinc-plated steel construction provides durability and corrosion resistance.
Features:
- Replaces the hasp on Polar cam-action lockable door latch kit (PLR258-002)
- Zinc-plated steel construction provides durability and corrosion resistance
- Dimensions: 5-1/8" long x 2" wide
- 3-3/4" From center of hole to center of hole
258-101 Hasp and Handle Keeper for Polar Hardware Economy Side Door Lock - Steel
Video of Replacement Hasp for Polar Cam-Action Latch Kit - 2" Wide - Zinc-Plated Steel
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Polar Cam-Action Latch Kit Replacement Hasp Review and Installation
Jake: Hey guys, Jake here at Etrailer. Today I'm going to show you how to replace your hasp on your enclosed trailer. This hasp is going to come in three different varieties. It's going to come in a zinc-plated steel, like we have here, aluminum and stainless steel. This is one part on your trailer that's often forgotten about for example this is the hasp that we replaced as you can see it's a little rusty, it doesn't work as smoothly, at times it'll squeak which is annoying. The new hasp is going to work very smoothly compared to our old one, obviously you can see it's got quite a bit of rust on it, that's where the zinc-plated finish, the aluminum and the stainless steel are all going to help to combat so that your new one isn't going to face the elements like her old one did.Now the operation is going to be the same as any hasp that you are familiar with.
It will have this little tab to hold it open which is a nice feature because I have used hasps in the past that do not have this little tab and it's a two-handed job, you have to hold it up to latch it in place. It is going to have a hole in both of the brackets to be able to put a padlock in. A quick note, the measurements between the holes are going to be four inches center on center, just so you know, so that you can match it up to your old existing holes. Now something to keep in mind, this kit is not going to come with new hardware so you're either going to have to pick up new hardware or you're going to have to use your old hardware that you took out of your old hasp. With that being said, it's a fairly simple installation so we'll go ahead and show you how to do that now.We lined it up with our old pre-existing holes and the holes are not going to line up so we're going to have to drill another hole and we will be able to reuse our old hardware, but we're going to go ahead and drill out that hole.Then we're going to be reinserting the hardware that came out of these holes on our old latch because I like how they have a flush mount design on the inside.
If you need to pick up new hardware, go ahead and just pick up the same bolts, they are going to have the same size square as the latch does. Then we can go ahead and test fit it after we got everything safely secured. Now we can take some gasket sealer or some caulk and fill in any holes that might be still present. Here we're just using some white caulk to patch up that hole.Once you're finished with the installation, you're ready to lock up your trailer and hit the road. Well guys, that's going to do it for our look at and installation of the replacement hasp on our enclosed trailer..
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Alternate product found
Customer Reviews
Replacement Hasp for Polar Cam-Action Latch Kit - 2" Wide - Zinc-Plated Steel - PLR258-101
Average Customer Rating: 4.9 out of 5 stars (189 Customer Reviews)
Replacement hasp fits Polar Hardware cam-action lockable door latch kit (PLR258-002) for large enclosed trailers. Zinc-plated steel construction provides durability and corrosion resistance.by: Christine02/10/2024
I purchased a 24 year old horse trailer that needed all hardware replaced due to rust and wear. eTrailer was a fantastic source for hasps, door locks, window locks, door bumpers and plungers and more. Everything fit my old trailer perfectly and there were installation videos to help! etrailer was my a great source for all my horse trailer repairs. My old trailer looks brand new!
by: Seth06/12/2019
I received these a couple days ago and got them installed on a set of replacement doors I was building. I was looking for something big for the locks on an old Semi trailer that uses the big commercial 1/2" thick bent bars, not the little 1/4" bars used on enclosed recreational or consumer cargo trailers. These things worked perfectly for those big commercial size Semi Trailer handles! Very heavy duty latches, that use 3/8" bolts and washers to secure. I'm very happy with them and would recommend them to anyone who needs to secure a 1/2" thick bar as the slot measures about 5/8" deep. I didn't measure the height, probably 1-1/2" give or take. Thanks!
Seth
6/14/2020
Working Awesome! Extremely happy with them!
by: Steve07/07/2022
I actually bought three latches to replace damaged ones on an equipment trailer. Took me about an hour to install them & they have been working great since then.
Steve
7/8/2023
This latch replaced a similar one on a construction trailer that was broken. Its working great.
by: Robert 03/29/2024
Was a great experience with this supplier and the item I received was a great price!
Thank You for treating me with your time
by: Edward 04/14/2024
Works well
by: Mike 02/11/2024
Great service and company
by: Benjamin02/12/2024
Always good serviced
by: James 03/01/2024
part arrived quickly, no problem!
by: Holly 08/10/2021
easy to navigate website, had exactly what we needed to fix our trailer lock after a break in, shipped fast, and item is good quality.
Holly
8/11/2022
All good with our latch…no problems, secure piece that allows us to secure our trailer with confidence.
by: Terrance 10/17/2023
Great time for shipping
by: Mendy04/17/2023
Excellent customer service! I addition, excellent product quality for a needed replacement part!!
by: Daniel 08/06/2023
Perfect fit to replace the old hasp. Well built.
by: Josiah01/26/2023
Simple installation. Great performance. Quality, heavy-duty steel handle.
by: Brian04/09/2018
No complaints with etrailer as my first experience ordering from the company was flawless. The product, on the other hand did not work out as expected.
My intent was to use a Trimax "hockey puck" style lock for extra security but the top and bottom pieces don't align to allow the lock to be put into place. The first time I tried it, the lock got stuck and it took about 15 minutes to remove. I have since started using a padlock until I can figure out a solution. I am not sure if this is anomaly due to a production defect, or if this latch is just not a good fit for the Trimax lock.
by: Rory 07/20/2023
Quality item!
by: Mike 10/02/2022
Very prompt getting me the latch and it works perfectly thank you
by: Jeremiah 05/16/2023
Works as expected
by: David12/29/2017
Ordered 2 replacement ramp door latches and side door retainer bracket, very pleased in the packing and promptness of delivery. Installed the latches today fit perfectly. Thanks guys will definitely use your products again.
by: David 01/27/2022
etrailer will be my "go to" store for trailer parts and accessories. Quality parts, good prices and fast service. Pretty hard to find all 3 these days.
by: Derek10/28/2017
The product was a perfect fit and matched the advertised description. etrailer was a easy to work with and the online experience was flawless. The product was packaged really well and arrived within a few days. I will do all my future trailer shopping with etrailer.
by: Joseph 11/12/2022
Exact replacement, works well.
by: Dinah11/09/2021
I ordered one of these a few weeks ago, lost it. This is the replacement. It's good quality and matches the one on my cargo trailer perfectly. Now I have two!
by: Sherry S05/19/2021
We have a very old horse trailer that needed an updated latch system. We found this latch and it welded on just great! IT's very strong and sturdy and the price was right too.
by: 04/09/2023
Easy to replace. Ecxcellent
25
189
Show More Reviews
See what our Experts say about this Polar Hardware Trailer Door Latch
- Replacement Handle Assembly Latch Kit and Pipe RetainerWe do offer replacement pieces for the Cam-Action Lockable Door Latch for Fold Down Trailer Gate or Side Door - Stainless Steel item # PLR258-002-SS you purchased. Replacement Hasp for Polar Cam-Action Latch Kit - 2" Wide - Zinc-Plated Steel item # PLR258-101 Replacement Handle Assembly for Polar Cam-Action Latch Kits - Zinc-Plated Steel item # 158-100 Replacement Top Pipe Retainer for Polar Cam-Action Latch Kits - Zinc-Plated Steel item # PLR158-209
view full answer... - Fit and Compatibility of Replacement Door Hasp for a 2000 Haulmark TrailerThe best thing to do to determine if this is the correct hasp for your 2000 Haulmark is to measure. I have linked an image with the measurements of the Polar Hasp # 158-101 to this page for your convenience. The center on center mounting holes are 4-1/4 inches apart and the width of the entire hasp will be 1 inch. If your hasp's mounting holes are 3-3/4 inches apart then you will want the # PLR258-101. If neither of these match your dimensions, just let me know what you find and I would...
view full answer...
- Replacement Hasp for Polar Cam-Action Latch KitReplacement Hasp # PLR258-101 can be used as a stand alone item but it is a replacement for the hasp that comes with Cam-Action Lockable Door Latch Kit # PLR258-002. It does not sound like what you are looking for though. To determine if we have what you are looking for I would need to see it. If you can please email me a picture.
view full answer... - Cam Latch Hasp Availability with Different Distances Between Mounting HolesI wish we had a cam hasp latch that matched the dimensions you listed but we only have options with 3-3/4 inch between mounting holes like part # PLR258-101 and 4 inches like part # PLR158-102-SS.
view full answer... - Recommended Hasp and Handle Keeper with Mounting Holes of 3-3/4 InchesGreat news! We do have a hasp and handle keeper with the mounting holes 3-3/4 inch apart. The part number you are looking for is the # PLR258-101. I have linked it to this page for your purchasing convenience.
view full answer... - Replacement Roof Vent Cover and Cargo Door Hasps for Haulmark TrailerFor your 2009 Haulmark trailer, I recommend the Replacement Hasp for Polar Cam-Action Latch Kits - 1" Wide - Zinc-Plated Steel # 158-101 with bolt hole measurements of 4-1/4 inches on center or the Replacement Hasp for Polar Cam-Action Latch Kit - 2" Wide - Zinc-Plated Steel # PLR258-101 with a bolt hole measurement of 3-3/4 inches on center. If you want the entire assembly, I recommend the Cam-Action Lockable Door Latch Kit w/ Narrow Hasp for Small Enclosed Trailers - Zinc-Plated Steel...
view full answer...
Do you have a question about this Trailer Door Latch?
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jameson C
Video Edited:
Jacob T
Installed by:
Cole B
Installed by:
Jacob H
Written by:
Amanda M
Video by:
Zach D
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Seth
6/14/2020
Working Awesome! Extremely happy with them!